Controller For 4-wire Resistive
USB Controller-4 wire Touch Panel
This touch panel controller provides the optimistic performance of your analog resistive touch panels for 4-wire models. It communicates with PC system directly though USB connector.You can see how superior the design is in sensitivity, accuracy and friendly operation. The touch panel driver emulates mouse left and right button function and supports operations systems, including Microsoft Windows XP, 2000, 95/98, Windows Me, NT4.0, CE2.12 & 3.0/ NET, DOS.
USB
RS232
Specifications:
- Circuit Board Dimension:20mm x 68mm (0.79inches x 2.68inches)----(4-Wire)
- Power Requirements: D.C.+5V (100mA typical,50mV peak to peak maximum ripple and noise)
- Operating Temperature: 0 to 50 ℃
- Storage Temperature: -40 to 80 ℃
- Relative Humidity: 95% at 60 ℃
- Interface: USB 1.1 Low Speed
- Report rate: USB Model: Max. 160 points/sec
- Response time: Max. 35 ms
- Attached Cable: 6' shielded cable with USB-A connector for
- Regulatory Approvals: FCC-B , CE, Unaffected by EMI from other nearly CRTs and other display devices
- EMI: Unaffected by environmental EMI
- Panel resistance:4 wire resistive model: 300 ~ 900 ohm.
